|
Our facility management system supports your business on every level.
We use state-of-the-art technology to keep your equipment running at all
times.
Environmental
ControlElectrical & Power Systems
To
ensure your success, our systems are designed with the latest dual-fed
power sources from Power Grid to power sockets to provide the highest
power available. Power Grid feeds are fully parallel redundant (N+1),
lower input harmonics Uninterrupted Power System (UPS) with dual feed
redundant secondary switchboards and critical load distribution boards.
All power sockets are powered by dual bus-bar systems with dedicated protection
for total flexibility and high availability. The facility is also supported
by a back-up diesel generator with full load capacity. So no matter what
the circumstances, we can take care of all your power needs.
Our independant Precision-Air-cooled Systems, eliminate the high risk
of water being present in the Data Centre. The centre is maintained at
a pleasant 22˚C with 50% humidity. This constant temperature provides
an idyllic working environment for our equipment and N+1 redundancy.
And to remove any chance of ‘hot spots’ within the racks we have installed
under floor air distribution.
Security
Equipment and data security are vital to your business. So we installed
surveillance cameras to monitor every section of the centre. No one can
enter the facility without our knowledge. And once inside, we can trace
their every move. On top of that, the Network Operation Centre is guarded
by security guards 24 hours a day, 7 days a week.
24
Hour Systems Monitoring and Prevention
We believe that you can never have enough security. We installed a
round-the-clock Facility Monitoring System, to solve any potential problems
before they escalate. We monitor the power supply, air conditioning, temperature
settings, fire detection & suppression system, water detection system
as well as the generators. Nothing is left to chance.
Fire
Detection System
All equipment is safeguarded by a fire detection and suppression system
called FM200. The system uses an environmentally friendly gas to estinguish
the flames within a minute of it being detected. To further protect your
data and equipment, the gas used to control the fire is non-corrosive.
Even after a fire has been extinguished, the facility remains fully operational.
Raised
Flooring System
Raised flooring provides easy access to data points and improved airflow
for the network. The antistatic, high pressure floor is not only good
for your equipment, it’s also easy to maintain.
Water
Detection System
To keep your system high and dry, we have a line sensor water detection
system. The system covers the walls and drainage area. In the event of
leakage, an early warning is sent to the Network Operation Centre.
Staging
and Test Lab
All equipment is thoroughly inspected and tested in our staging and
test lab before being deployed. This allows you to verify its application
and environment.
|
